INDUSTRY LEADERS
0

Basic Rigging Licence

5 Days | $1,650 | CSQ Funded Course Price $1,050 | Save $600 | Our place or yours!

Basic Rigging | Licence | CPCCLRG3001A

CPCCLRG3001A Licence to perform rigging basic level

A basic rigging licence encompass the requirements for a dogging licence. To apply for a basic rigging licence you must hold, or have previously passed assessment for, a dogging licence.

The scope of work for basic rigging includes:

  • dogging work
  • structural steel erection
  • particular hoists
  • placement of pre-cast concrete members of a structure
  • safety nets and static lines
  • mast climbers
  • perimeter safety screens and shutters
  • cantilevered crane loading platforms

This unit specifies the outcomes required to perform basic rigging work associated with movement of plant and equipment, steel erections, hoists (including mast climbing hoists), placement of pre-cast concrete, safety nets and static lines, perimeter safety screens and shutters; and cantilever crane loading platforms for licensing purposes.

This unit requires the applicant to be able plan the work, select and inspect equipment, set up task, erect structures and plant and dismantle structures and plant.

This unit is based upon the National Standard for Licensing Persons Performing High Risk Work.
This unit in its current form meets state and territory licensing requirements. Any alteration will result in a unit which is not acceptable to regulators for the purpose of licensing.

This unit has a pre-requisites requirement. This requirement may be met by either the successful completion of the unit CPCCLDG3001A Licence to perform dogging or holding a valid licence for dogging.

Training Provider

Recruitment or prospective learners for this course, as well as training and Assessment services, is provided by On the Job Training Pty Ltd. On the Job Training Pty Ltd, recruits students, provides training and assessment as well as provides support services on behalf of OHSA Occupational Health Services Australia (RTO 31092) under a Third Party Agreement.

Location of Training and Assessment

The location details of Training and Assessment will be provided with your course confirmation email.

  • Legislative Requirements
  • Hazards, Planning and Controls
  • Steel Erection
  • Working at Heights
  • Sheaves, Purchases and Winching Systems
  • Material Hoists and Mast Climbers
  • Bends, Hitches, Whipping and Splicing

Training

With successful completion of the training applicants will be issued with a Statement of Attainment (SOA) for:

RIIHAN209D Perform basic rigging

Mandatory assessment

With successful completion of the mandatory assessment applicants will be issued with an assessment summary (AS1) and Statement of Attainment (SOA) for the Unit of Competency:

CPCCLRG3001A Licence to perform rigging basic level

Licence Application

Successful applicants will receive an assessment summary (AS1) from the accredited assessor and a Statement of Attainment from OHSA. Applicants need to complete the online application for a new Queensland HRW Licence on the Worksafe QLD website.  This must be done within 60 days of successfully completing the practical assessment. The application fee is $92.50 and payable at the time of your application.

Students should retain their AS1 and proof of payment as evidence that they can lawfully perform work in the relevant class of High Risk, pending a decision on your application. Upon lodgement, enquiries regarding your application should be directed to Workplace Health and Safety QLD on phone 1300 369 915.

Training Requirements & What To Bring

  • High Risk Work Licence assessments can only be undertaken at the age of 18 years or over
  • All current High Risk Work Licences
  • Logbooks recording high risk work hours under supervision (if available)
  • Unique Student Identifier (USI) is required prior to course commencement – please bring number to course.
  • Photo ID i.e. Queensland or Interstate Driver’s Licence or Passport
  • Applicants will be required to have a basic knowledge and understanding of the English language
  • PPE must be worn by students attending the course on all occasions. This includes steel cap boots, long pants, long sleeves, (high vis shirt if possible otherwise long sleeves with a high vis vest) and a safety hard hat. For dogging, rigging & scaffolding courses, students are required to bring gloves and safety glasses.
  • OHSA will provide whistles as well as the general training equipment, notes, logbook and training plans, calculators and pens.

 

Training Facilities

Recruitment or prospective learners for this course, as well as training and Assessment services, is provided by On the Job Training Pty Ltd. On the Job Training Pty Ltd, recruits students, provides training and assessment as well as provides support services on behalf of OHSA Occupational Health Services Australia (RTO 31092) under a Third Party Agreement.

Location of Training and Assessment

The location details of Training and Assessment will be provided with your course confirmation email.

The training facilities are comfortable air conditioned with modern training aids. Tea and coffee making facilities are provided as well as fridges and a microwave for participants to use. There are several takeaway lunch spots of good quality within a kilometre. Lunch is not provided with the training.

Students have direct access to all the necessary plant required for the relevant course i.e. Cranes, EWP, Forklifts and Scaffold.

 

Basic Rigging Training Courses Licence

Study

Option

Face-to-face

Maximum

Students

8

Duration

5 Days

Locations

Gold Coast

Price

$1,650.00

CORPORATE ACCOUNTS

Sign up for a Corporate Account and receive great discounts and other benefits

REGISTER NOW

COURSE DATES AND LOCATIONS

View courses by location:

View as:

List

Location Date Time Price Make a Booking
Gold Coast 04 Feb - 08 Feb 2019 7:30 am - 4:00 pm$1,650.00 ADD TO CART
Gold Coast 18 Feb - 22 Feb 2019 4:00 pm - 9:00 pm$1,650.00 ADD TO CART
Gold Coast 18 Mar - 22 Mar 2019 4:00 pm - 9:00 pm$1,650.00 ADD TO CART
Email Quote

Separate multiple addresses by comma