Get your experience recognised
RPL the Std 11 Mining
Induction in a few hours

Mining Induction Standard 11 Surface – RPL

RIICOM201D : Communicate in the workplace
RIIGOV201D: Comply with site work processes/procedures
RIIWHS201D: Work safely and follows WHS policies and procedures
RIIRIS201D: Conduct local risk control
RIIERR205D : Apply initial response First Aid
RIIERR302D : Respond to local emergencies and incidents
RIIERR201D: Conduct fire team operations
$400 or $500 Combined Surf. & U/Genrol-now-sm
cs-content-time
Duration: 0.5 day
07.30am - 3.00pm
cs-content-location
Locations:
Brisbane, Gold Coast
cs-content-person
Maximum Students:
14
Coal mine excavator

Course Dates and Locations

Brisbane

enrol-now-sm
cs-content-time 07.30am - 3.00pm
June July August September October November December
12 June 2017 11 July 2017 8 August 2017 5 September 2017 03 Oct 2017 14 Nov 2017 12 Dec 2017
26 June 2017 25 July 2017 22 August 2017 18 September 2017 17 Oct 2017 28 Nov 2017
31 Oct 2017

cs-content-location Construction Training Centre Address: The Construction Training Centre, Suite 1.4 Ian Barclay Building, Gate 2, 460-492 Beaudesert Rd, Salisbury QLD 4107
Parking: On site. Located through Gate 2 at The Construction Training Centre, 460-492 Beaudesert Rd, Salisbury Qld 4107. Access to Gate 2 is via the slip road under the Beaudesert Rd overpass.
Map: Click here for directions
To locate our facility in the Ian Barclay Building download the map here


Gold Coast

enrol-now-sm
cs-content-time 07.30am - 3.00pm

By appointment

 

cs-content-location OHSA Training Rooms - West Burleigh Address: 5/90 Township Drive, West Burleigh Qld 4219
Parking: All day FREE street parking is available. No parking on premises.
Map: Click here for directions

Course Description

RISA Logo

OHSA is licensed by the Resources Industry Skills Association to deliver the INDUSTRY RECOGNISED ‘Standard 11 Generic OH&S Induction’ which is the training identified by the Queensland Mining Inspectorate for workers on a Mine in Qld. This course covers both Coal and Metalliferous Mines and exceeds most other State mining general safety induction requirements.

It is recognised that many workers within the Resources sector have existing skills and knowledge that map to the Standard 11 Mining Induction competencies. These workers have the opportunity to have these recognised through this RPL program. Candidates must present a variety of recent (within past 2 years) relevant mining industry evidence to be eligible for enrolment to this program. OHSA will contact you upon registration into this course to verify your eligibility into this program. If you have any questions about your eligibility into this program contact our office on 1300 647 200.

Attendance to the 1/2 day course will require the candidate to complete a written theory questionnaire, participate in an interview with an industry assessor, demonstrate CPR and the safe use of a fire extinguisher.  We also offer a 5 day workers package which includes Standard 11, Work at Heights, Confined Spaces and Senior First Aid over 5 consecutive days from Monday to Friday or Wednesday to Sunday weekly. Supervisors can choose to do the 5 day supervisors package which includes the Standard 11, Mining Supervisor S123 and G2 over 5 consecutive days Monday to Friday or Wednesday to Sunday.

ATTENTION: Do your Standard 11 Mining Induction, Mining Supervisor S123 and the G2 courses in a 5 day program with OHSA. Contact our office on 1300 647 200 and save! 

Target Audience

This program is aimed at experienced mine workers with recent mining experience within the past 2 years. If you do not have recent experience you will be required to attend the full 2 day induction. 

You should always check first with the specific site you intend to work for, industry or State you wish to work in, to determine their specific site or industry requirements.  Like construction sites, mine site also have their own site specific induction requirements over and above the mining induction courses which must also be completed to enter onto their site. Some States do not have any specific generic safety induction requirements and are thereby determined on a mine by mine basis, however this program usually covers many of the subjects/topics required by many of those sites. BMA’s Queensland 8 coal mines (there are over 50 coal mines in Queensland with many new ones being developed) have their own process for mining and site specific inductions. Should you be intending to go straight to one of BMA’s Queensland Coal Mines you should contact them to enquire about their specific site requirements. The RISA Resources Induction has been developed to meet the Queensland Government’s Recognised Standard 11 ‘Training in Coal Mines: Appendix 3 Generic OH&S Induction’ requirements for induction training for new workers and covers both Coal and Metalliferous Mines.

Course Requirements

Participants must provide their USI number (see www.usi.gov.au) at enrolment and bring along to the course valid photographic identification (i.e. driver’s licence, passport) and a portfolio of evidence of recent mining experience as instructed by OHSA upon enrolment into this program. OHSA will contact you upon registration into this course to verify your eligibility into this program. You must provide evidence or recency and or currency of experience or working in the resources sector on a mine within the previous 2 years. If you have any questions about your eligibility into this program contact our office on 1300 647 200. Closed shoes must also be worn and you should bring long sleeved clothing for the fire fighting. Participants should have sufficient literacy and numeracy to read and comprehend instructions for safety at the workplace. Participants will need sufficient physical ability to attend a classroom based course, perform CPR floor demonstration exercises and lift and carry approximately 10kg fire extinguisher to extinguish a fire.

Assessments and Awards

Successful candidates will be awarded a Statement of Attainment against the following units:

  • RIICOM201D : Communicate in the workplace
  • RIIGOV201D: Comply with site work processes/procedures
  • RIIWHS201D: Work safely and follows WHS policies and procedures
  • RIIRIS201D: Conduct local risk control
  • RIIERR205D : Apply initial response First Aid
  • RIIERR302D : Respond to local emergencies and incidents

The OHSA Trainer / Assessor may deem that you are not eligible for the Statement of Attainment during the challenge test / theory assessments / interview questions. You may then be required to attend the full 2 day Standard 11 Surface Mining Induction (additional costs would apply) or you may be issued a Statement of Completion with a Workplace Evidence Checklist that must be completed onsite and be returned to OHSA within 6 months. You will be able to work on a mine site with the Statement of Completion. Note: You must hold the Surface Induction before you are eligible for the underground elective or you must pass the surface RPL before you can progress onto the Underground RPL. You must also show recency / currency in the resources sector on a mine (within the past 2 years) to be eligible for a Statement of Attainment, otherwise you may be issued with a Statement of Completion with a Workplace Evidence Checklist to complete and return within 6 months of attending the RPL course before you are awarded the Statement of Attainment. 

enrol-now-sm

© 2012 OHSA Occupational Health Services Australia ABN: 73 833 631 941 / R.T.O No: 31092

Home | Terms of Use Student Handbook Privacy Policy Careers Newsletter Awards Site Map Contact Us

Ph: 1300 647 200 | Fax: 1300 852 970 | Email: info@ohsa.com.au