INDUSTRY LEADERS
0

Dogging Course Licence

5 Days | $1,200 | CSQ Funded Course Price $600 | Save $600 | Our place or yours!

Dogging | Licence | CPCCLDG3001A

CPCCLDG3001A – Licence to perform dogging

A high risk work licence for dogging (class DG) is required by anyone who applies slinging techniques to a load, which includes:

  • calculating the safe angle for sling or chain
  • selecting the type of sling or chain to be used
  • selecting the correct method to secure the load
  • selecting the safe method to lift or turn the load
  • checking the conditions of lifting gear for wear and tear.

A DG licence is also required by anyone directing the operator of a crane or hoist in the movement of a load when the load is out of the view of the operator.

Unit Description

 

This unit specifies the outcomes required to perform slinging techniques, including the selection and inspection of lifting gear and/or the directing of the crane operator in the movement of the load when the load is out of view of the crane/ operator for licensing purposes.This unit covers the scope of work to demonstrate competency in the application of slinging techniques, selection and inspection of lifting gear and/or the directing of the crane/ operator in the movement of the load.

Training Provider

Recruitment or prospective learners for this course, as well as training and Assessment services, is provided by On the Job Training Pty Ltd. On the Job Training Pty Ltd, recruits students, provides training and assessment as well as provides support services on behalf of OHSA Occupational Health Services Australia (RTO 31092) under a Third Party Agreement.

Location of Training and Assessment

The location details of Training and Assessment will be provided with your course confirmation email.

  • WHS legislation, risks and hazards
  • General inspection and preparation of work site requirements
  • Handle and use dogging tools
  • Plan and prepare job
  • Select and inspect equipment
  • Prepare site and equipment
  • Perform tasks including slinging and shifting loads
  • Dismantle and inspect load shifting equipment
  • Clean up including tools maintenance and storage

 

With successful completion of the training applicants will be issued with a Statement of Attainment (SOA) for:

RIIHAN208D Perform dogging

Mandatory assessment

With successful completion of the mandatory assessment applicants will be issued with an assessment summary (AS1) and Statement of Attainment (SOA) for the Unit of Competency:

CPCCLDG3001A Licence to perform dogging

Licence Application

Successful applicants will receive an assessment summary (AS1) from the accredited assessor and a Statement of Attainment from OHSA. Applicants need to complete the online application for a new Queensland HRW Licence on the Worksafe QLD website. This must be done within 60 days of successfully completing the practical assessment. The application fee is $92.50 and payable at the time of your application.

Students should retain their AS1 and proof of payment as evidence that they can lawfully perform work in the relevant class of High Risk, pending a decision on your application. Upon lodgement, enquiries regarding your application should be directed to Workplace Health and Safety QLD on phone 1300 369 915.

Training Requirements & What To Bring

  • High Risk Work Licence assessments can only be undertaken at the age of 18 years or over
  • All current High Risk Work Licences
  • Logbooks recording high risk work hours under supervision (if available)
  • Unique Student Identifier (USI) is required prior to course commencement – please bring number to course.
  • Photo ID i.e. Queensland or Interstate Driver’s Licence or Passport
  • Applicants will be required to have a basic knowledge and understanding of the English language
    PPE must be worn by students attending the course on all occasions. This includes steel cap boots, long pants, long sleeves, (high vis shirt if possible otherwise long sleeves with a high vis vest) and a safety hard hat.
  • For dogging, rigging & scaffolding courses, students are required to bring gloves and safety glasses.
  • The training provider will provide the general training equipment as well as notes, logbook and training plans, calculators and pens.

 

Training Facilities

Recruitment or prospective learners for this course, as well as training and Assessment services, is provided by On the Job Training Pty Ltd. On the Job Training Pty Ltd, recruits students, provides training and assessment as well as provides support services on behalf of OHSA Occupational Health Services Australia (RTO 31092) under a Third Party Agreement.

Location of Training and Assessment

The location details of Training and Assessment will be provided with your course confirmation email.

The training facilities are comfortable air conditioned with modern training aids. Tea and coffee making facilities are provided as well as fridges and a microwave for participants to use. There are several takeaway lunch spots of good quality within a kilometre. Lunch is not provided with the training.

Students have direct access to all the necessary plant required for the relevant course i.e. Cranes, EWP, Forklifts and Scaffold.

 

Dogging Course Licence

Study

Option

Face-to-face

Maximum

Students

8

Duration

5 Days

Locations

Gold Coast

Price

$1,200.00

CORPORATE ACCOUNTS

Sign up for a Corporate Account and receive great discounts and other benefits

REGISTER NOW

COURSE DATES AND LOCATIONS

View courses by location:

View as:

List

Location Date Time Price Make a Booking
Email Quote

Separate multiple addresses by comma